HGO Series DC Output Modules
Product Detail:
FEATURES :
Bipolar transistor output, on-state voltage drop low, switching speedily
Each module provides 4000V of optical isolation between the field devices and the control logic.
100% tested at rating current , CE compliant .
PCB Mount, Single in Line Package.
Application :
HGO series standard DC output modules adapt ignition-proof plastic cover, filled with EPOXY, PCB mount, single in line package .Widely used for the interface between computer and external devices ,specially used to control or switch AC load:
Relays
Contactors
Motorstarters
Heaters
Solenoids
Lamp and Indicators
Models :
| Model No | General specification |
| HGO-DC5 | DC output 5-60VDC,Logic voltage 5VDC |
| HGO-DC5A | DC output 5-200VDC,Logic voltage 5VDC |
| HGO-DC15 | DC output 5-60VDC,Logic voltage 15VDC |
| HGO-DC15A | DC output 5-200VDC,Logic voltage 15VDC |
| HGO-DC24 | DC output 5-60VDC,Logic voltage 24VDC |
| HGO-DC24A | DC output 5-200VDC,Logic voltage 24VDC |
Output parameters (Ta:25℃) :
| Load current | 5A@35 2A@70 ℃ |
| Turn on time | 50us |
| Turn off time | 50us |
| Voltage drop | 1.6VDC |
| Leekege current | 50uA |
| Working temp. | 30 ℃ to +80℃ |
| Dielectric strength | 4000VAC |
| Weight | 45g |
General parameters (Ta:25℃) :
| Model No | HGO-DC5 | HGO-DC5A | HGO-DC15 | HGO-DC15A | HGO-DC24 | HGO-DC24A |
| Line volt.( Nominal) . | 60VDC | 200VDC | 60VDC | 200VDC | 60VDC | 200VDC |
| Output volt. Range | 5-60VDC | 5-200VDC | 5-60VDC | 5-200VDC | 5-60VDC | 5-200VDC |
| Logic voltage range | 5VDC | 5VDC | 15VDC | 15VDC | 24VDC | 24VDC |
| Logic voltage range | 2.5-8VDC | 2.5-8VDC | 9-16VDC | 9-16VDC | 18-32VDC | 18-32VDC |
| Logic pickup voltage | 2.5VDC | 2.5VDC | 9VDC | 9VDC | 18VDC | 18VDC |
| Logic dropout voltage | 1VDC | 1VDC | 1VDC | 1VDC | 1VDC | 1VDC |
| Logic input current | 12mA | 12mA | 15mA | 15mA | 18mA | 18mA |
| Input impedance | 220 Ohms | 220 Ohms | 1K Ohms | 1K Ohms | 2.2K Ohms | 2.2K Ohms |
PRECAUTIONS :
When controlling AC inductive load, the SSR may be damaged by the high transient voltage and surge current added on the output, so some special clamping devices to control voltage, such as zener diode, varistor. .
When controlling a small current(close to Min. load current),a dummy resistance should be paralleled to reduce the rest voltage produced by the surge current on the output .
When a jointing type relay is mounted, the temperature should be controlled under 260 centigrade degrees and the time will be limited within 5second.
To avoid the temperature exceeding the allowance, heatsink efficiency and the mounting position should be regarded, suitable space will be left when two or more SSR are mounted .
This series are prohibited for capacitive load .
